Free UK Delivery on orders over £49

Nikwax Rug Proof

Item Number: NIK9003773

Nikwax Rug Proof

Choose Your Options:

  • 1L

    Usually dispatched on Tuesday if ordered within 13 hours and 2 minutes

    Was £12.99 Now £9.65

    Web code: E2169

  • 25L

    In Stock

    Was £170.00 Now £128.55

  • 5L

    Usually dispatched on Tuesday if ordered within 13 hours and 2 minutes

    Was £49.99 Now £38.49

    Web code: E8235

Total: £0.00

Choose options to add to basket

 

 


Browse other products from the Nikwax product range

Description

Nikwax Rug Proof adds Durable Water Repellency (DWR) whilst maintaining breathability. It is quick and easy to apply in the washing machine, and its DWR develops on air drying.

Nikwax Rug Wash has been specifically designed and optimised for breathable waterproof animal rugs and coats. It leaves a flexible water repellent treatment on individual fibres allowing moisture vapour to pass through, maintaining breathability, while protecting your animal from getting wet in the rain.

Finally, washing machine application ensures that the treatment goes right through the rug or coat, treating seams, tapes and cords, as well as the fabric.

Benefits
The easy to use, safe, high performance wash in waterproofing for all animal rugs and coats.
Adds Durable Water Repellency and revitalises breathability and insulation of your animal's rugs and coats.

Directions for use
Apply Nikwax Rug Proof in the washing machine...
For best results always clean rug first with Nikwax Rug Wash™. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.

Remove all detergent build-up from the detergent dispenser.
Place clean rug in washing machine.
Use 500 ml for 1 rug. Treat 1 rug per load.
Run 30°C cotton cycle.
Air dry or tumble dry on a low setting if care label allows.

Use Nikwax Rug Proof™ by hand...
For best results always clean rug first with Nikwax® Rug Wash™. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.

Wear gloves. Use 500 ml for 1 rug, with 10 litres of hand-hot water in vessel.
Agitate to mix, push down into vessel so that whole rug is immersed.
Add a further 15 litres of warm water to cover rug and agitate.
Leave to soak for 2 hours, agitating occasionally.
Rinse in cold water until water runs clear.
Air dry or tumble dry on a low setting if care label allows.

Sponge on Nikwax Rug Proof...
For best results always clean rug first with Nikwax® Rug Wash™. No need to dry item(s) before waterproofing. It is vital that rugs are washed and rinsed thoroughly. Shake well before use. Follow care label instructions.

Wear gloves. Spread clean rug on clean area and wet thoroughly with a hose.
Use 500 ml for 1 rug, with 1.5 litres of hand-hot water.
Using a new sponge apply solution to rug, working into fabric and seams.
Use any surplus on back area of rug, leave for 5-10 minutes.
Rinse in cold water until water runs clear.
Air dry or tumble dry on a low setting if care label allows.

Reviews